| Full rigged Mast for Racing | 725.00 | Spreader with collar | 18.00 |
| Full Rigged Daysail Mast | 545.00 | Spreader ends | 3.25 |
| Mast Tube | 235.00 | Gooseneck | 40.00 |
| Mast Tube | 195.00 | Boomvang Mast Rotator | 24.95 |
| Mast Head | 24.95 | Halyard hook | 4.00 |
| Mast Butt Casting | 20.00 | Harken 6:1 Magic Box | 89.95 |
| Full Rigged Boom | 255.00 | Jib Uphaul Slider w/track | 37.95 |
| Boom Tube | 100.00 | Harken 325 mini-cleat fairlead | 19.15 |
| Front Boom Casting | 20.00 | Harken 092 Cheek Block | 8.95 |
| Boom Outhaul Casting | 24.95 | Spar Fly wind indicator | 22.95 |
| Fore Stay with Turnbuckle | 54.00 | Windex 10 direction indicator | 36.95 |
| Side Stay with Turnbuckle | 54.00 | Mast head sheaves | 10.00 |
| Diamond Stay w/Turnbuckle | 54.00 | Main sail--SHORE | $738 |
| Main Halyard | 64.00 | Jib sail--SHORE | $405 |
| Jib Halyard | 68.00 | The above are 1998 prices |
Custom Stays and Halyards
Nickels Boat Works does not have any information
on the length of older Rebel stays. If you need stays or halyard we need the measurement
of your old one. In some cases it may be necessary to send us the old one so that we can duplicate it.
We need to know the total length (eye to eye) including the turnbuckle. We also need to know the amount that
the turnbuckle is unscrewed. Also what type of fitting tat attaches to the deck, a eye or a jaw?
For Custom Halyards we need to know the length of the wire including the shackle and the Nicro Press fitting or do you want wire to rope? When in doubt the more information that you supply the easier that you make it for us to serve you better.
We offer a trailer made to fit a Rebel hull complete with lights, tie down straps and front castor wheel. It is fully galvanized and has 12 inch wheels. $ 1125
| Spare Tire $65.00 | Light board $89.50 | Tie down strap $10.50 | Castor Wheel $70.00 | Bearing Buddies $22.95 |
| Galvanized Steel Centerboard | 330.00 | Stainless Steel Centerboard | 755.00 |
| Centerboard Rollers set | 20.00 | Centerboard cable | 15.85 |
| Centerboard trunk ring | 15.50 | Rudder cheek assembly | 120.00 |
| Rudder blade fiberglass | 170.00 | Rudder blade wood unfinished | 65.00 |
| Tiller aluminum tube type | 25.00 | above finished 3/4" or 5/8" | 95.00 |
| Wood jaw type tiller for older boats | 40.00 | Stainless steel rudder head | 33.00 |
| Tiller lock pin for aluminum tiller | 11.25 | Hiking Stick | 43.75 |
| Upper pintle 3/8" Pin | 17.60 | Lower pintle 3/8" pin | 18.00 |
| Heavy duty Gudgeon 3/8" | 10.75 | Spring rudder lock | 2.50 |
| Wisker Pole Jaw & Spike end | 60.00 | same with Jaw & Spinnaker ends | 90.00 |
| Rub rail 1" hard vinyl (black or white) | 85.00 | Rub rails screws box of 100 | 7.00 |
| Mainsheet | 24.00 | Jib sheet | 18.00 |
| Padded hiking straps many colors | 35.00 | Hull striping kit | 38.00 |
| Elvstrom Super Max Bailer | 89.00 | Tri colors of Blue or Yellow Orange& | Red |
| Transom flap bailer | 34.95 | Brown-Gold-Beige or Black Silver & | White |
| Boom Crutch--wood | 14.50 | Seat slats for new boats ea. | 6.50 |
| Boom crutch 1" aluminum tube | 16.00 | Boat covers are available | call |
Nickels Boat Works
2426 South Long Lake Rd.
Fenton MI 48430
Phone (810)750-1855
FAX (810) 750-0501
WE ACCEPT VISA MASTERCARD & DISCOVER
We suggest that you use US mail to send credit card information since e-mail is not secure. If you are paying by check then call since we need to give you a price including the shipping.